Disc data recovery programs are able to read data while skipping bad sectors. We cannot recommend any specific name here, but they all work on a pretty much similar basis. In case this did not help, there is no choice left, will have to try to restore the information with help of a special CD scratch repair tool. So that new scratches do not appear on the disc during the efforts to fix the scratched CDs. Since these substances do not dissolve completely it is necessary to carry out the procedure easily, without using excessive force. The toothpaste should be of high quality, without large abrasive particles. A simple toothpaste diluted mixed with warm water can serve as a material for such polish. If, however, the scratch is bad enough to prevent your CD from working correctly, step one in removing scratches from the CD would be to carefully polish the protective coating. If you have a CD, DVD or Blu-ray with some personal info and need to mark it somehow, then do not use a pen or pencil under any circumstances. It is still preferable that you do not write on the disc at all. So only sign the non-working side of the disc. The thing is it can break the balance when spinning in the fast drive. They are harmful not only when placed on the working surface (which is almost never done by the users for obvious reasons) but when placed on the back of the disc as well. Another way to damage your disc is putting sticky notes on a disc surface. Under the bright sun, the disc may warp, after that it will not only stop being read, but may even “explode” when you try to run it in the disc reader. Direct sunlight and/or moisture destroy the discs physically, but not as fast as high temperatures, which can obviously burn anything within seconds. If enough dust accumulates on a disc’s working surface, the disc drive will not be able to read the information of such CD, DVD, and it’ll require careful cleaning. As it was mentioned, they are highly vulnerable to destructive influence of dust, heat, moisture, sunlight and mechanical damage. Most common ways to damage your disc (avoid these!)ĬDs, DVDs, and Blu-Rays are technically well-done but they do require special treatment. Do not put stickers (sticky notes) on the discs.Do not write on discs using a pen or a pencil, even on the backside you should use special markers only.Do not spin the disc on your finger or when in a case. ![]() When taking the disc out of the case or putting it back in, one must never force the disc.Never put your fingers on a disc surface. ![]() ![]() ![]() Needless to say that no abrasive compounds should be anywhere near such shelves.įurther advice on how to handle the discs include: Wood is a preferred material for the shelves as it keeps the same temperature, does not collect static electricity that can damage the discs, plus it looks nice if done right. What comes to mind here is some sort of special (wooden) shelves with little notches separating the disc cases. Of course, the discs should each be in separate cases and have a distance between them. Such a place must be located in a cold, dust free side of your house and away from the direct sunlight. If you are planning to keep your discs functional for as long as possible, then the first thing to do is organize a separate place to store them. How to store DVDs, CDs, Blu-rays so they don’t get damaged
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |